Product > Electrical devices > Battery chargers
Charger plugs into the 220V mains. Connectivity is no spark because the charging current 5 seconds after establishing the nominal value. The charging current is increased until the beginning of the development of gas in comparison to conventional chargers is higher because all this time is held constant - there is a regulation (in traditional battery charging current falls steadily growing on the battery voltage), resulting in a significant reduction in charging time. After that, the charge current decreases steadily over time and controlled by the voltage on the battery is held constant. The battery can be left after completion of charging the battery attached. During this time the battery voltage is held constant 13.8V, so it is done updating. This charger can be used for sealed batteries that is. Lead-Acid Batteries. Advantages charger AKUI-7 compared to conventional are: shorter charging time, controlled charging at all times, diagnosisand display, battery protection from over load or insufficient battery, charger output protection against short circuit after switching to 220V, the protection of the wrong polarity of the charger when connecting the battery.
Battery charger AKUI-7	Battery charger KPP 24-60
Power supply: Uu= 220 V~, 50Hz Charge current: max 7A Mains fuse: 8A Average consumption: 150W Dimensions: 205 x 275 x 190 mm Weight: 6 kg	Input voltage: Uu= 220 V~, 50Hz Maximum output voltage: 30 V Maximum output current: 60 A Degree of protection: IP 22 Dimensions: 400 x 300 x 550 mm Weight: 23 kg